Toggle clamps - Vertical series - Toggle clamp Form A

Toggle clamp Form A - Form E

Toggle clamps - Vertical series

Also available in stainless steel material

Vertical series with folded base.
Some sizes of this series are also produced in stainless steel and are shown below in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes ?130)
Handles: Red polyurethane resistant to oils, grease and other chemical agents.
Performance: Form A and form AX with open clamping lever and two flanged washers.
Form E and form EX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately (see Accessories Series)
Features and applications: During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses.
A special grease is placed between two contacting surfaces during assembly.
You can find this series in pneumatic version in "Pneumatic series"

Code	Description	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Q	Z	Fh (daN)	Gr.	CAD
AA520	75/A	66.5	98	20.5	37.5	34	29	24	15-16	-	5.2	11	2	20	M5	4.5	56	75	98	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=10} {NB=75/A0},{CODICE=AA520},{MODELLO=75/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=66.5},{AX=66.5},{B=98},{BX=98.0},{C=20.5},{D=37.5},{E=34},{F=29},{G=24},{H=15-16},{I=-},{L=5.2},{M=11},{N=2},{O=20},{P=M5},{Q=4.5},{Z=56},{FH=75},{FH1=75},{FH2=160},{GR=98},{PPATH=ae_2013_asmtpl.prj}
AA524	75/E	67	98	20.5	38	34	29	24	15-16	4	-	11	2	-	M5	4.5	-	75	100	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=30} {NB=75/E0},{CODICE=AA524},{MODELLO=75/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=67},{AX=67.0},{B=98},{BX=98.0},{C=20.5},{D=38},{E=34},{F=29},{G=24},{H=15-16},{I=4},{L=-},{M=11},{N=2},{O=-},{P=M5},{Q=4.5},{Z=-},{FH=75},{FH1=75},{FH2=160},{GR=100},{PPATH=ae_2013_asmtpl.prj}
AA530	130/A	85	142	28	50	42	35	27-29	12.5-19	-	6.2	16	2.5	28	M6	5.6	71	105	230	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=50} {NB=130/A0},{CODICE=AA530},{MODELLO=130/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=85},{AX=85.0},{B=142},{BX=142.0},{C=28},{D=50},{E=42},{F=35},{G=27-29},{H=12.5-19},{I=-},{L=6.2},{M=16},{N=2.5},{O=28},{P=M6},{Q=5.6},{Z=71},{FH=105},{FH1=105},{FH2=175},{GR=230},{PPATH=ae_2013_asmtpl.prj}
AA534	130/E	86	142	28	51	42	35	27-29	12.5-19	5	-	16	2.5	-	M6	5.6	-	105	235	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=70} {NB=130/E0},{CODICE=AA534},{MODELLO=130/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=86},{AX=86.0},{B=142},{BX=142.0},{C=28},{D=51},{E=42},{F=35},{G=27-29},{H=12.5-19},{I=5},{L=-},{M=16},{N=2.5},{O=-},{P=M6},{Q=5.6},{Z=-},{FH=105},{FH1=105},{FH2=175},{GR=235},{PPATH=ae_2013_asmtpl.prj}
AA540	230/A	110.5	168	33.5	67.5	45	43	32	19-20	-	8.5	18	3	40	M8	6.7	94	200	380	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=90} {NB=230/A0},{CODICE=AA540},{MODELLO=230/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=110.5},{AX=110.5},{B=168},{BX=168.0},{C=33.5},{D=67.5},{E=45},{F=43},{G=32},{H=19-20},{I=-},{L=8.5},{M=18},{N=3},{O=40},{P=M8},{Q=6.7},{Z=94},{FH=200},{FH1=200},{FH2=320},{GR=380},{PPATH=ae_2013_asmtpl.prj}
AA544	230/E	112	168	33.5	69	45	43	32	19-20	6	-	18	3	-	M8	6.7	-	200	390	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=110} {NB=230/E0},{CODICE=AA544},{MODELLO=230/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=112},{AX=112.0},{B=168},{BX=168.0},{C=33.5},{D=69},{E=45},{F=43},{G=32},{H=19-20},{I=6},{L=-},{M=18},{N=3},{O=-},{P=M8},{Q=6.7},{Z=-},{FH=200},{FH1=200},{FH2=320},{GR=390},{PPATH=ae_2013_asmtpl.prj}
AA550	330/A	129	195	43	79	65	50	45-46	29-32	-	10.5	22	3.5	43	M10	8.5	108	240	604	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=130} {NB=330/A0},{CODICE=AA550},{MODELLO=330/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=129},{AX=129.0},{B=195},{BX=195.0},{C=43},{D=79},{E=65},{F=50},{G=45-46},{H=29-32},{I=-},{L=10.5},{M=22},{N=3.5},{O=43},{P=M10},{Q=8.5},{Z=108},{FH=240},{FH1=240},{FH2=400},{GR=604},{PPATH=ae_2013_asmtpl.prj}
AA554	330/E	130.5	195	43	80.5	65	50	45-46	29-32	7	-	22	3.5	-	M10	8.5	-	240	604	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=140} {NB=330/E0},{CODICE=AA554},{MODELLO=330/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=130.5},{AX=130.5},{B=195},{BX=195.0},{C=43},{D=80.5},{E=65},{F=50},{G=45-46},{H=29-32},{I=7},{L=-},{M=22},{N=3.5},{O=-},{P=M10},{Q=8.5},{Z=-},{FH=240},{FH1=240},{FH2=400},{GR=604},{PPATH=ae_2013_asmtpl.prj}
AA560	430/A	164	247	55.5	106	65	58	45	32	-	12.5	26	4	64	M12	8.5	138	280	1100	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=150} {NB=430/A0},{CODICE=AA560},{MODELLO=430/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=164},{AX=164.0},{B=247},{BX=247.0},{C=55.5},{D=106},{E=65},{F=58},{G=45},{H=32},{I=-},{L=12.5},{M=26},{N=4},{O=64},{P=M12},{Q=8.5},{Z=138},{FH=280},{FH1=280},{FH2=500},{GR=1100},{PPATH=ae_2013_asmtpl.prj}
AA564	430/E	166	247	55.5	108	65	58	45	32	10	-	26	4	-	M12	8.5	-	280	1100	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=160} {NB=430/E0},{CODICE=AA564},{MODELLO=430/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=166},{AX=166.0},{B=247},{BX=247.0},{C=55.5},{D=108},{E=65},{F=58},{G=45},{H=32},{I=10},{L=-},{M=26},{N=4},{O=-},{P=M12},{Q=8.5},{Z=-},{FH=280},{FH1=280},{FH2=500},{GR=1100},{PPATH=ae_2013_asmtpl.prj}
AA570	530/A	223	303	84.5	143	95	80	70	50-51	-	12.5	32	7	90	M12	12.5	195	450	2110	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=180} {NB=530/A0},{CODICE=AA570},{MODELLO=530/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=223},{AX=223.0},{B=303},{BX=303.0},{C=84.5},{D=143},{E=95},{F=80},{G=70},{H=50-51},{I=-},{L=12.5},{M=32},{N=7},{O=90},{P=M12},{Q=12.5},{Z=195},{FH=450},{FH1=450},{FH2=875},{GR=2110},{PPATH=ae_2013_asmtpl.prj}
AA574	530/E	225	303	84.5	145	95	80	70	50-51	10	-	32	7	-	M12	12.5	-	450	2110	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=170} {NB=530/E0},{CODICE=AA574},{MODELLO=530/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=225},{AX=225.0},{B=303},{BX=303.0},{C=84.5},{D=145},{E=95},{F=80},{G=70},{H=50-51},{I=10},{L=-},{M=32},{N=7},{O=-},{P=M12},{Q=12.5},{Z=-},{FH=450},{FH1=450},{FH2=875},{GR=2110},{PPATH=ae_2013_asmtpl.prj}

Products in Stainless Steel

Code	Description	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Q	Z	Fh (daN)	Gr.	CAD
AS095	75/AX	66.5	98	20.5	37.5	34	29	24	15-16	-	5.2	11	2	20	M5	4.5	56	75	98	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=20} {NB=75/AX0},{CODICE=AS095},{MODELLO=75/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=66.5},{AX=66.5},{B=98},{BX=98.0},{C=20.5},{D=37.5},{E=34},{F=29},{G=24},{H=15-16},{I=-},{L=5.2},{M=11},{N=2},{O=20},{P=M5},{Q=4.5},{Z=56},{FH=75},{FH1=75},{FH2=160},{GR=98},{PPATH=ae_2013_asmtpl.prj}
AS105	75/EX	67	98	20.5	38	34	29	24	15-16	4	-	11	2	-	M5	4.5	-	75	100	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=40} {NB=75/EX0},{CODICE=AS105},{MODELLO=75/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=67},{AX=67.0},{B=98},{BX=98.0},{C=20.5},{D=38},{E=34},{F=29},{G=24},{H=15-16},{I=4},{L=-},{M=11},{N=2},{O=-},{P=M5},{Q=4.5},{Z=-},{FH=75},{FH1=75},{FH2=160},{GR=100},{PPATH=ae_2013_asmtpl.prj}
AS150	130/AX	85	142	28	50	42	35	27-29	12.5-19	-	6.2	16	2.5	28	M6	5.6	71	105	230	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=60} {NB=130/AX0},{CODICE=AS150},{MODELLO=130/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=85},{AX=85.0},{B=142},{BX=142.0},{C=28},{D=50},{E=42},{F=35},{G=27-29},{H=12.5-19},{I=-},{L=6.2},{M=16},{N=2.5},{O=28},{P=M6},{Q=5.6},{Z=71},{FH=105},{FH1=105},{FH2=175},{GR=230},{PPATH=ae_2013_asmtpl.prj}
AS160	130/EX	86	142	28	51	42	35	27-29	12.5-19	5	-	16	2.5	-	M6	5.6	-	105	235	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=80} {NB=130/EX0},{CODICE=AS160},{MODELLO=130/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=86},{AX=86.0},{B=142},{BX=142.0},{C=28},{D=51},{E=42},{F=35},{G=27-29},{H=12.5-19},{I=5},{L=-},{M=16},{N=2.5},{O=-},{P=M6},{Q=5.6},{Z=-},{FH=105},{FH1=105},{FH2=175},{GR=235},{PPATH=ae_2013_asmtpl.prj}
AS180	230/AX	110.5	168	33.5	67.5	45	43	32	19-20	-	8.5	18	3	40	M8	6.7	94	200	380	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=100} {NB=230/AX0},{CODICE=AS180},{MODELLO=230/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=110.5},{AX=110.5},{B=168},{BX=168.0},{C=33.5},{D=67.5},{E=45},{F=43},{G=32},{H=19-20},{I=-},{L=8.5},{M=18},{N=3},{O=40},{P=M8},{Q=6.7},{Z=94},{FH=200},{FH1=200},{FH2=320},{GR=380},{PPATH=ae_2013_asmtpl.prj}
AS190	230/EX	112	168	33.5	69	45	43	32	19-20	6	-	18	3	-	M8	6.7	-	200	390	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=120} {NB=230/EX0},{CODICE=AS190},{MODELLO=230/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=112},{AX=112.0},{B=168},{BX=168.0},{C=33.5},{D=69},{E=45},{F=43},{G=32},{H=19-20},{I=6},{L=-},{M=18},{N=3},{O=-},{P=M8},{Q=6.7},{Z=-},{FH=200},{FH1=200},{FH2=320},{GR=390},{PPATH=ae_2013_asmtpl.prj}

Other products in the series: Toggle clamps - Vertical series

NEW

Toggle clamps - Vertical series

Toggle clamp Form AVF - Form EVF New
Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form B - Form F
Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form AL - Form EL
Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form BL - Form FL
Toggle clamps - Vertical series

Toggle clamp Form ELS-FLS
Toggle clamps - Vertical series

Toggle clamp Form AV - Form EV
Toggle clamps - Vertical series

Toggle clamp Form AVF - Form EVF
Toggle clamps - Vertical series

Toggle clamp Heavy vertical series

Choose the product and download the Cad file you prefer

Toggle clamp Form A - Form E

Toggle clamps - Vertical series

Also available in stainless steel material

Products in Stainless Steel

Other products in the series: Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series