Toggle clamps - Vertical series - Toggle clamp Form A/AX

Toggle clamp Form A/AX - E/EX

Toggle clamps - Vertical series

VERTICAL TOGGLE CLAMPS WITH FOLDED BASE

Material:
Galvanized Steel (A/E) or AISI 304 stainless steel (AX/EX).

Riveted Pivots:
Galvanized steel (A/E) or AISI 304 stainless steel (AX/EX).

Supporting bushes (for sizes ≥ 130):
Hardened and ground galvanized or stainless steel.

Handle:
Red polyurethane; resistant to oils, greases and other chemical agents.

Executions:
• A/AX: open clamping lever with two flanged washers, included in the supply.
• E/EX: full clamping lever and bolt retainer, included in the supply, to be welded in the desired position and angle.

Features and applications:
During closing, the clamping lever is guided laterally to ensure greater stability against any transverse stresses.
The movement of the levers has been designed to ensure the safety of the operator’s fingers and prevent them from being crushed during the movement of the tool.
A special grease is applied to the contact surfaces to reduce friction and make the movement smoother.

Other available executions:
Series with safety lever, reinforced series, pneumatic series.

Accessories:
• Spindles
• Lever crossbars for A/AX
• Safety sensor kit
Too see the accessories in this series click here >>>

Request Information

Code	Description	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Q	Z	Fh (daN)	Gr.	CAD
AA520	75/A	67	98	20.5	38	34	29	24	15÷16	-	5.2	11	2	20	M5	4.5	56	75	98	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=10} {NB=75/A0},{CODICE=AA520},{MODELLO=75/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=67},{AX=66.5},{B=98},{BX=98},{C=20.5},{D=38},{E=34},{F=29},{G=24},{H=15÷16},{I=-},{L=5.2},{M=11},{N=2},{O=20},{P=M5},{Q=4.5},{Z=56},{FH=75},{FH1=75},{FH2=160},{GR=98},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA524	75/E	67.5	98	20.5	38.5	34	29	24	15÷16	4	-	11	2	-	M5	4.5	-	75	100	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=30} {NB=75/E0},{CODICE=AA524},{MODELLO=75/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=67.5},{AX=67},{B=98},{BX=98},{C=20.5},{D=38.5},{E=34},{F=29},{G=24},{H=15÷16},{I=4},{L=-},{M=11},{N=2},{O=-},{P=M5},{Q=4.5},{Z=-},{FH=75},{FH1=75},{FH2=160},{GR=100},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA530	130/A	85	142	28	50	42	35	27÷29	12.5÷19	-	6.2	16	2.5	28	M6	5.6	71	105	230	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=50} {NB=130/A0},{CODICE=AA530},{MODELLO=130/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=85},{AX=85},{B=142},{BX=142},{C=28},{D=50},{E=42},{F=35},{G=27÷29},{H=12.5÷19},{I=-},{L=6.2},{M=16},{N=2.5},{O=28},{P=M6},{Q=5.6},{Z=71},{FH=105},{FH1=105},{FH2=175},{GR=230},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA534	130/E	86	142	28	51	42	35	27÷29	12.5÷19	5	-	16	2.5	-	M6	5.6	-	105	235	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=70} {NB=130/E0},{CODICE=AA534},{MODELLO=130/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=86},{AX=86},{B=142},{BX=142},{C=28},{D=51},{E=42},{F=35},{G=27÷29},{H=12.5÷19},{I=5},{L=-},{M=16},{N=2.5},{O=-},{P=M6},{Q=5.6},{Z=-},{FH=105},{FH1=105},{FH2=175},{GR=235},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA540	230/A	110.5	168	33.5	67.5	45	43	32	18÷21	-	8.5	18	3	40	M8	6.7	94	200	380	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=90} {NB=230/A0},{CODICE=AA540},{MODELLO=230/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=110.5},{AX=110.5},{B=168},{BX=168},{C=33.5},{D=67.5},{E=45},{F=43},{G=32},{H=18÷21},{I=-},{L=8.5},{M=18},{N=3},{O=40},{P=M8},{Q=6.7},{Z=94},{FH=200},{FH1=200},{FH2=320},{GR=380},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA544	230/E	112	168	33.5	69	45	43	32	18÷21	6	-	18	3	-	M8	6.7	-	200	390	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=110} {NB=230/E0},{CODICE=AA544},{MODELLO=230/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=112},{AX=112},{B=168},{BX=168},{C=33.5},{D=69},{E=45},{F=43},{G=32},{H=18÷21},{I=6},{L=-},{M=18},{N=3},{O=-},{P=M8},{Q=6.7},{Z=-},{FH=200},{FH1=200},{FH2=320},{GR=390},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA550	330/A	129	195	43	79	65	50	45÷46	29÷32	-	10.5	22	3.5	43	M10	8.5	108	240	604	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=130} {NB=330/A0},{CODICE=AA550},{MODELLO=330/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=129},{AX=129},{B=195},{BX=195},{C=43},{D=79},{E=65},{F=50},{G=45÷46},{H=29÷32},{I=-},{L=10.5},{M=22},{N=3.5},{O=43},{P=M10},{Q=8.5},{Z=108},{FH=240},{FH1=240},{FH2=400},{GR=604},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA554	330/E	130.5	195	43	80.5	65	50	45÷46	29÷32	7	-	22	3.5	-	M10	8.5	-	240	604	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=140} {NB=330/E0},{CODICE=AA554},{MODELLO=330/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=130.5},{AX=130.5},{B=195},{BX=195},{C=43},{D=80.5},{E=65},{F=50},{G=45÷46},{H=29÷32},{I=7},{L=-},{M=22},{N=3.5},{O=-},{P=M10},{Q=8.5},{Z=-},{FH=240},{FH1=240},{FH2=400},{GR=604},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA560	430/A	164	247	55.5	106	65	58	45	32	-	12.5	26	4	64	M12	8.5	138	280	1100	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=150} {NB=430/A0},{CODICE=AA560},{MODELLO=430/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=164},{AX=164},{B=247},{BX=247},{C=55.5},{D=106},{E=65},{F=58},{G=45},{H=32},{I=-},{L=12.5},{M=26},{N=4},{O=64},{P=M12},{Q=8.5},{Z=138},{FH=280},{FH1=280},{FH2=500},{GR=1100},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA564	430/E	166	247	55.5	108	65	58	45	32	10	-	26	4	-	M12	8.5	-	280	1100	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=160} {NB=430/E0},{CODICE=AA564},{MODELLO=430/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=166},{AX=166},{B=247},{BX=247},{C=55.5},{D=108},{E=65},{F=58},{G=45},{H=32},{I=10},{L=-},{M=26},{N=4},{O=-},{P=M12},{Q=8.5},{Z=-},{FH=280},{FH1=280},{FH2=500},{GR=1100},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA570	530/A	223	303	84.5	143	95	80	70	50÷51	-	12.5	32	7	90	M12	12.5	195	450	2110	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=180} {NB=530/A0},{CODICE=AA570},{MODELLO=530/A},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=-},{ANGOLO=0},{A=223},{AX=223},{B=303},{BX=303},{C=84.5},{D=143},{E=95},{F=80},{G=70},{H=50÷51},{I=-},{L=12.5},{M=32},{N=7},{O=90},{P=M12},{Q=12.5},{Z=195},{FH=450},{FH1=450},{FH2=875},{GR=2110},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AA574	530/E	225	303	84.5	145	95	80	70	50÷51	10	-	32	7	-	M12	12.5	-	450	2110	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=170} {NB=530/E0},{CODICE=AA574},{MODELLO=530/E},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=-},{ANGOLO=0},{A=225},{AX=225},{B=303},{BX=303},{C=84.5},{D=145},{E=95},{F=80},{G=70},{H=50÷51},{I=10},{L=-},{M=32},{N=7},{O=-},{P=M12},{Q=12.5},{Z=-},{FH=450},{FH1=450},{FH2=875},{GR=2110},{PPATH=ae_2013_asmtpl.prj}	QUOTE

Products in Stainless Steel

Code	Description	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Q	Z	Fh (daN)	Gr.	CAD
AS095	75/AX	67	98	20.5	38	34	29	24	15÷16	-	5.2	11	2	20	M5	4.5	56	75	98	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=20} {NB=75/AX0},{CODICE=AS095},{MODELLO=75/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=67},{AX=66.5},{B=98},{BX=98},{C=20.5},{D=38},{E=34},{F=29},{G=24},{H=15÷16},{I=-},{L=5.2},{M=11},{N=2},{O=20},{P=M5},{Q=4.5},{Z=56},{FH=75},{FH1=75},{FH2=160},{GR=98},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AS105	75/EX	67.5	98	20.5	38.5	34	29	24	15÷16	4	-	11	2	-	M5	4.5	-	75	100	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=40} {NB=75/EX0},{CODICE=AS105},{MODELLO=75/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=67.5},{AX=67},{B=98},{BX=98},{C=20.5},{D=38.5},{E=34},{F=29},{G=24},{H=15÷16},{I=4},{L=-},{M=11},{N=2},{O=-},{P=M5},{Q=4.5},{Z=-},{FH=75},{FH1=75},{FH2=160},{GR=100},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AS150	130/AX	85	142	28	50	42	35	27÷29	12.5÷19	-	6.2	16	2.5	28	M6	5.6	71	105	230	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=60} {NB=130/AX0},{CODICE=AS150},{MODELLO=130/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=85},{AX=85},{B=142},{BX=142},{C=28},{D=50},{E=42},{F=35},{G=27÷29},{H=12.5÷19},{I=-},{L=6.2},{M=16},{N=2.5},{O=28},{P=M6},{Q=5.6},{Z=71},{FH=105},{FH1=105},{FH2=175},{GR=230},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AS160	130/EX	86	142	28	51	42	35	27÷29	12.5÷19	5	-	16	2.5	-	M6	5.6	-	105	235	{speedyblock/verticale/ae_2013_asmtab.prj},013 {LINEID=80} {NB=130/EX0},{CODICE=AS160},{MODELLO=130/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=86},{AX=86},{B=142},{BX=142},{C=28},{D=51},{E=42},{F=35},{G=27÷29},{H=12.5÷19},{I=5},{L=-},{M=16},{N=2.5},{O=-},{P=M6},{Q=5.6},{Z=-},{FH=105},{FH1=105},{FH2=175},{GR=235},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AS180	230/AX	110.5	168	33.5	67.5	45	43	32	18÷21	-	8.5	18	3	40	M8	6.7	94	200	380	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=100} {NB=230/AX0},{CODICE=AS180},{MODELLO=230/AX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=1.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=110.5},{AX=110.5},{B=168},{BX=168},{C=33.5},{D=67.5},{E=45},{F=43},{G=32},{H=18÷21},{I=-},{L=8.5},{M=18},{N=3},{O=40},{P=M8},{Q=6.7},{Z=94},{FH=200},{FH1=200},{FH2=320},{GR=380},{PPATH=ae_2013_asmtpl.prj}	QUOTE
AS190	230/EX	112	168	33.5	69	45	43	32	18÷21	6	-	18	3	-	M8	6.7	-	200	390	{speedyblock/verticale/ae_2013_asmtab.prj},014 {LINEID=120} {NB=230/EX0},{CODICE=AS190},{MODELLO=230/EX},{FAM=Toggle Clamps},{SER=Vertical},{USE=AE application},{VERS=2.000},{ESECUZIONE=Acciaio inox},{ANGOLO=0},{A=112},{AX=112},{B=168},{BX=168},{C=33.5},{D=69},{E=45},{F=43},{G=32},{H=18÷21},{I=6},{L=-},{M=18},{N=3},{O=-},{P=M8},{Q=6.7},{Z=-},{FH=200},{FH1=200},{FH2=320},{GR=390},{PPATH=ae_2013_asmtpl.prj}	QUOTE

Other products in the series: Toggle clamps - Vertical series

Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form B/BX - F/FX
Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form AL/ALX - EL/ELX
Also available in stainless steel material

Toggle clamps - Vertical series

Toggle clamp Form BL/BLX – FL/FLX
Toggle clamps - Vertical series

Toggle clamp Form ELS/FLS
Toggle clamps - Vertical series

Toggle clamp Form AV-EV
Toggle clamps - Vertical series

Toggle clamp Form AVF-EVF
Toggle clamps - Vertical series

Toggle clamp Form LLA-LLE
Toggle clamps - Vertical series

Toggle clamp Form LLB-LLF
Toggle clamps - Vertical series

Toggle clamp Form F
Toggle clamps - Vertical series

Toggle clamp Form LSC
Toggle clamps - Vertical series

Toggle clamp Form LSG
Toggle clamps - Vertical series

Toggle clamp Form LSH
Toggle clamps - Vertical series

Toggle clamp Form ER
Toggle clamps - Vertical series

Toggle clamp Form C

Choose the product and download the Cad file you prefer

Toggle clamp Form A/AX - E/EX

Toggle clamps - Vertical series

Products in Stainless Steel

Other products in the series: Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series

Toggle clamps - Vertical series