The control and clamping levers move in opposite directions. When clamping is obtained, the control lever is in the horizontal position. Available with clamping forces between 40 and 620 daN.
PERFORMANCE: Parts made of case-hardening sheet steel. Hardened and tempered supporting pivots. Supporting bushes (for sizes from 350 daN and over) undergo case-hardening and grinding. Finish: Galvanized. The shape of the tool ensures a safe distance between the clamping and control lever that prevents the operator's fingers from getting stuck during the opening of the tool. The clamping lever is guided in the locked position for additional stability any sideways movement. In order to prevent accidental openings, caused by vibrations, some tools of this series are provided with a device called, "safety device", suitable for maintaining the clamp in a closed position.
Toggle clamp Form M - Form O
Toggle clamps - Horizontal series
Also available in stainless steel material
Horizontal series with folded base.
Some sizes of this series are also made of stainless steel and are shown in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes >=355)
Handles: Red polyurethane, resistant to oils, grease and other chemical agents.
Performance: Form M and form MX with open clamping lever and two flanged washers.
Form O and form OX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately (see Accessories Series)
Features and applications:The main feature of this series is the low profile of the tool; these tools are designed to
prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses.
A special grease is placed between two contacting surfaces during assembly
Toggle clamp Form N - Form P
Toggle clamps - Horizontal series
Also available in stainless steel material
Horizontal series with Straight base.
Some sizes of this series are also made of stainless steel and are shown in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes >=355)
Handles: Red polyurethane, resistant to oils, grease and other chemical agents.
Performance: Form N and form NX with open clamping lever and two flanged washers.
Form P and form PX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately (see Accessories Series)
Features and applications:The main feature of this series is the low profile of the tool; these tools are designed to
prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses.
A special grease is placed between two contacting surfaces during assembly
Toggle clamp Form ML - Form OL
Toggle clamps - Horizontal series
Also available in stainless steel material
Horizontal series with folded base and with anti-realease lever. "Patent Pending"
Some sizes of this series are also made of stainless steel and are shown in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes >=355)
Handles: Red polyurethane, resistant to oils, grease and other chemical agents.
Performance: Form ML and form MLX with open clamping lever and two flanged washers.
Form OL and form OLX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately (see Accessories Series)
Features and applications: The main feature of this series is the special anti-release lever with the purpose of avoiding any accidental openings caused by vibrations; these tools are designed to prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses.
A special grease is placed between two contacting surfaces during assembly.
Toggle clamp Form NL - Form PL
Toggle clamps - Horizontal series
Also available in stainless steel material
Horizontal series with folded base and with anti-realease lever. "Patent Pending"
Some sizes of this series are also made of stainless steel and are shown in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes >=355)
Handles: Red polyurethane, resistant to oils, grease and other chemical agents.
Performance: Form NL and form NLX with open clamping lever and two flanged washers.
Form PL and form PLX with full clamping lever and bolt retainers to be welded in the desired position and angle.
Spindles: To be ordered separately (see Accessories Series)
Features and applications: The main feature of this series is the special anti-release lever with the purpose of avoiding any accidental openings caused by vibrations; these tools are designed to prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses.
A special grease is placed between two contacting surfaces during assembly.
Toggle clamp Form OLS - Form PLS
Toggle clamps - Horizontal series
New
Horizontal series with anti-release lever and extended clamping lever
Material:Galvanized steel
Riveted pivots:Galvanized steel
Supporting bushes:Hardened and ground steel.
Handles:Red polyurethane resistant to oils, grease and other chemical agents.
Performance: Form OLS with extended clamping lever and folded base. Form PLS with extended clamping lever and straight base.
Spindles:To be ordered separately.
Extensions:The models are supplied with AP6 and AP8 extension as per the drawing and with two flanged washers .
Features and applications:The main features of this series are the special anti-release lever and the special extension of the locking arm to facilitate the specific use in control templates; these tools are designed to prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses. A special grease is placed between two contacting surfaces during assembly.
Toggle clamp Form MF
Toggle clamps - Horizontal series
Also available in stainless steel material
Horizontal series with front base.
Some sizes of this series are also produced in stainless steel and are shown below in red.
Material: Galvanized steel or AISI 304 stainless steel
Riveted pivots: Galvanized steel or AISI 304 stainless steel
Supporting bushes: Hardened and ground steel (for sizes ? 355)
Handles: Red polyurethane resistant to oils, grease and other chemical agents.
Performance: Form MF and form MFX with open clamping lever and two flanged washers.
Spindles: To be ordered separately (see Accessories Series)
Features and applications: The main feature of this series is the front mount; these tools are designed to prevent the operator's fingers from being crushed by the levers when opening. During the closing, the clamping lever is guided laterally to ensure greater stability against possible transverse stresses. A special grease is placed between two contacting surfaces during assembly.